Search by Vehicle

1" Lower Coil Spacer - Ford Super Duty F250/F350 2005-2022

$139.95
Out of stock
SKU
67-2551

Max Lift: 1.0" - Lower Coil Spring Spacer

Have a question? Please call 800-549-4620

TIRE/WHEEL SIZING GUIDE

  • For the 4WD Ford Super Duty owner who wants to lift their stock truck 1.0" or increase the size of their current leveling or mild lift kit.

    This lower spring mount attaches to the axle and is constructed from CNC machined billet aluminum. Includes new longer hardware. Ideal for helping to lift the front of your Super Duty back up after adding a heavy winch, bumper or snow plow assembly.

  • SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

    Do it yourself!

    Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.

    Download Pdf Instructions
    Estimated Installation Time: 3.8 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)

    Have a certified mechanic do it for you!


Quick Overview
Max Lift: 1.0" - Lower Coil Spring Spacer
Details

For the 4WD Ford Super Duty owner who wants to lift their stock truck 1.0" or increase the size of their current leveling or mild lift kit.

This lower spring mount attaches to the axle and is constructed from CNC machined billet aluminum. Includes new longer hardware. Ideal for helping to lift the front of your Super Duty back up after adding a heavy winch, bumper or snow plow assembly.

Installation
SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

Do it yourself!

Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.

Download Pdf Instructions
Estimated Installation Time: 3.8 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)

Have a certified mechanic do it for you!