2.4'' Front Leveling Kit - Toyota Tundra 2007-2017
2007-2017 Tundra 2WD/4WD Leveling Kit with differential drop spacers.
Not for use on 2015-17 Tundra TRD Pro w/ Bilstein shocks
ReadyLIFT® leveling kits are the fastest, safest, least expensive way to bring the front of your vehicle level with the rear. Our innovative Smart Strut Technology mounts on top of the strut assembly, eliminating the hassle, time and danger of compressing springs. ReadyLift® steel strut extension will maintain a smooth OEM ride without adding pressure to stock suspension components, guaranteed!
The 66-5075 strut extension provides 2.4" of lift which gives clearance to add up to 33" wheels and tires to the 2007-2017 Toyota Tundra 2wd & 4wd. For information about tire and wheel sizes please visit the ReadyLift Tire Sizing and Calculator Page.
Note: Not for use on 2015-up Tundra TRD Pro w/ Bilstein shocks
Installation is simple and requires no strut preloading, cutting, or modification of factory installed parts. While other kits cost thousands to buy and hours to install, ReadyLIFT® can be installed one to two hours and costs less than the price of a single custom wheel.
ReadyLIFT Lifetime Warranty Included! All ReadyLift® products are backed by a lifetime warranty for as long as you own your vehicle and includes all necessary parts, hardware, detailed installation instructions, and two color decals.
Note: It is ReadyLIFT's position that our objective is to provide a product that levels the vehicle. Through on-going research we have discovered that Toyota trucks have a unique pattern of being manufactured and sold with varying degrees of rear to front rake. It appears that many Toyota trucks are not the same height or possess the same rake as the same stock truck sitting next to it. Our research has determined there can be as much as 1.0" difference in rake and ride height from truck to truck. TRD-equipped trucks often have only 1.0" of rake compared to a non-TRD truck. Measurements on some customer's trucks have revealed as much as 1.0" difference in the factory front end height.
If you measure the truck at stock height, then install a 3" strut extension and determine after installation and alignment that the truck sits nose high, you most likely are an owner of one of the trucks that has less rear to front rake. To compensate for the difference, ReadyLift suggests installing one of our 1.0" (66-5001) Rear Block Kits to achieve a slight rake to a level stance.
NOTE: 2010-2017 Tundra trucks with the 4.6 V8 engine will required 66-5001 1" rear block kit for a level stance.
- Keeps your factory ride - Guaranteed
- Will never wear, break or fail - Guaranteed
- Toughest finish – Guaranteed
- Safest way to level lift - Guaranteed
Also Recommended--ReadyLift 1" Rear Lift Blocks--The perfect Tow Package Upgrade
ReadyLift® OEM style rear block kits are now available for all Tundra model applications. These Rear Block Kits include (2) Rear Blocks, (4) E-Coated U-Bolts, (8) Nuts and Washers and will safely lift the rear of your Truck an additional 1". Based on OEM designs and made from cast iron, never made out of light weight extrusions. ReadyLift® Block Kits will put a slight rake back in your Truck for hauling or towing and are designed to work in concert with your ReadyLift® Suspension Leveling Kit. This is a great Tow Package upgrade that allows you to fully lift your truck while maintaining the use it like it was originally intended. Like all ReadyLift® products these block kits come with our Lifetime Warranty.ReadyLIFT Rear Block Kit Features:
- OEM Style Design with new E-coated U-bolts and hardward
- Made from cast iron, not light weight extrusions
- Toughest finish – Guaranteed
- Built in locator pin, not pressed in steel pins into aluminum which can wear out
- Puts a slight rake back in your truck for towing and hauling
- Lifetime Warranty!
Some of our customer's trucks:
Professional Installation Recommended
33" Maximum tire diameter
33x12.50 for no rub on a 9" wide wheel with +25 offset
17" - 33X12.5R17
18" - 305/65R18
20" - 305/55R20 - 33X12.5R20
22" - 33X12.5R22
One pair of fabricated steel top mount strut extensions with differential drop spacers and skid plate spacers.
Write Your Own Review
Do it yourself!
Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.Download Pdf Instructions
Have a certified mechanic do it for you!