2.5''F / 2''R Lift Kit W/ 4'' Rear Blocks - Ford Super Duty F250 4WD (1-pc Drive Shaft Only) 2005-2007
Max Lift 2.5-in Max Tire Diameter 37-in.
2005-2007 F-250 4WD.
For use on trucks with one-piece drive shaft. Includes 4" rear block.
ReadyLIFT® Suspension Inc. has engineered the perfect 2.5" lift kit for your 2008-2010 Ford F250 4WD Super Duty with one-piece drive shaft. This is the perfect solution if you want to add larger wheels and tires. This first ever mild lift kit allows you to go up to a 37" wheel and tire combination while keeping the smooth OEM ride and drivability. When used with the maximum size tires your Super Duty truck body is raised over 6 inches.
This is the only complete lift kit that includes the following: (2) Rear OEM style blocks that have the OEM integrated bump stops (2) Coil spring extensions (1) OEM cast style Panhard bracket (2) Front bump stop extensions, (2) OEM shock extension brackets and all needed hardware.
This kit includes a 4" rear block and is designed for use on trucks with a one-piece drive shaft.
ReadyLIFT's "Smart Suspension Technology" is used to make this kit very user friendly to install requiring no cutting. Professional installation time is estimated at 5 hours. Like all other ReadyLIFT® kits, the F250 lift kit is 100% guaranteed to maintain your trucks factory ride and includes a lifetime warranty against manufacturing defects.
If you want a mild lift that allows you to install the larger tires you want without having to break the bank, this is the perfect mild lift kit for you!
Note: Fits Single Rear Wheel Trucks ONLY--Not Dual Rear Wheels
Trucks equipped with factory Snow Plow option the front end may sit 1/2" higher in front. Snow Plow option equipped F250 trucks should use 69-2516TP (2008-2010) or 69-2515TP (2005-2007)
Note: This kit will work with trucks that have the overload or camper springs.
Features & Benefits:
- Keeps your factory ride - Guaranteed
- Will never wear, break or fail - Guaranteed
- Toughest finish – Guaranteed
- Safest way to lift - Guaranteed
- The only Super Duty mild lift kit system that includes an OEM-style Panhard Bar Drop Bracket
- Rear Lift Blocks are cast iron OEM design and include the OEM Bump Stop Landings
- Allows for up to a 37" tire when using OEM wheels or offset equivalent
For information about tire and wheel sizes please visit the ReadyLift Tire Sizing and Calculator Page.
37" Maximum tire diameter
37x12.50 for no rub on a 9" wide wheel with 0 offset
18" - 37X12.5R18
20" - 37X12.5R20
22" - 325/60R22
Two coil spring spacers with poly sound isolators
Two front shock extensions.
Two front sway bar mount spacers.
One front track bar relocation bracket
Two OEM style cast rear lift blocks with longer u-bolts and hardware.
Two bump stop extensions.
Extended length front brake line brackets.
Write Your Own Review
Do it yourself!
Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.Download Pdf InstructionsEstimated Installation Time: 6.25 Hours
Have a certified mechanic do it for you!