2.5"F / 2"R Lift Kit W/ 4" Rear Blocks - Ford Super Duty F250 4WD (1-pc Drive Shaft Only) 2008-2010
Max Lift 2.5 in - Max Tire Diameter 37 in.
2008-2010 F-250 4WD
Includes 4" rear block. For trucks with one-piece drive shaft.
ReadyLIFT Suspension Inc. has engineered the perfect 2.5" Tow Package lift kit for your 2008-2010 Ford F250/F350/F450 4WD Super Duty providing 2.5" front lift and 1.5"-3.0" rear lift depending on application. This is the perfect solution if you want to add larger wheels and tires to your tow vehicle. This lift kit allows you to go up to a 37" tall tires on OEM offset wheels while keeping the smooth OEM ride and drivability. When used with the maximum size tires your Super Duty truck body is raised over 6". This is the only complete lift kit that includes the following: two (2) coil spring extensions, one (1) OEM cast style Panhard bracket. two (2) Front bump stop extensions, one (1) Carrier bearing spacer, two (2) OEM shock extension brackets, two(2) 5.0" OEM-style Rear Lift Blocks with OEM-style bump stop landings, and all needed hardware. The shock extensions allow you to retain the smooth riding factory shocks while our exclusive panhard bar drop bracket provides correct steering geometry, something competing kits cannot provide. ReadyLIFT's "Smart Suspension Technology" is used to make this kit very user friendly to install requiring no cutting. Like all other ReadyLIFT kits, the F250/F350/F450 lift kit is 100% guaranteed to maintain your trucks factory ride and includes a lifetime warranty against manufacturing defects.
NOTE: For use with trucks with one-piece drive shafts.
NOTE: The lift blocks in this kit are not designed to work with aftermarket or factory add-on air spring/load leveling kits that attach to the bump stop tangs. Use of this type of air bag system will void all block warranties and can cause failure of the block bump stop tang.
37" Maximum tire diameter
37x12.50 for no rub on a 9" wide wheel with 0 offset
18" - 37X12.5R18
20" - 37X12.5R20
22" - 325/60R22
Two coil spring spacers with poly sound isolators
Two front shock extensions.
Two front sway bar mount spacers.
One front track bar relocation bracket
Two OEM style cast rear lift blocks with longer u-bolts and hardware.
Two bump stop extensions.
Write Your Own Review
Do it yourself!
Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.Download Pdf InstructionsEstimated Installation Time: 6 Hours +/- 1 hour (excluding alignment and wheel/tire assembly)
Have a certified mechanic do it for you!
California Residents: Prop 65 WARNING Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov