Search by Vehicle

2'' Front Leveling Kit - Toyota Tacoma 6-Lug 1995.5-2004

$229.95
In stock
SKU
66-5055

2005-17 TOYOTA TACOMA/PRERUNNER -2.25in. FRONT LEVELING KIT

Max Lift 2.0" - Max Tire Diameter 32"

Includes differential drop spacers and skid plate spacers.

Have a question? Please call 877-759-9991

TIRE/WHEEL SIZING GUIDE

2005-17 TOYOTA TACOMA/PRERUNNER -2.25in. FRONT LEVELING KIT

Max Lift 2.0" - Max Tire Diameter 32"

Includes differential drop spacers and skid plate spacers.

Add On's
Check items to add to the cart or
  • FOR 2016-17 MODEL TACOMA'S UNTIL FURTHER NOTICE. Some 2016 Tacoma's may experience a deceleration vibration. If your truck has the "Crawl Feature" transfer case and only has a 1" stock rake between front and rear, you can use the kit but do not use the differential drop spacers. 

    ReadyLIFT® leveling kits are the fastest, safest, least expensive way to bring the front of your vehicle level with the rear. Our innovative Smart Strut Technology mounts on top of the strut assembly, eliminating the hassle, time and danger of compressing springs. ReadyLift® steel strut extension will maintain a smooth OEM ride without adding pressure to stock suspension components, guaranteed!

    The 66-5055 strut extension provides 2.25” of lift which gives clearance to add up to 32” wheels and tires to the 2005-2017 Toyota Tacoma 2wd & 4wd and PreRunner. 33' tires can be used with some minor trimming of the inner fender panel. For information about tire and wheel sizes please visit the ReadyLift Tire Sizing and Calculator Page.

    NOTE: 2011-2016 Tacoma applications: Toyota made minor changes to the Tacoma upper control arm suspension geometry. In some cases adding a leveling kit MAY affect the ability to correct the caster alignment to within factory specifications. If you have a 2011-2014 Tacoma with a leveling kit and the caster alignment specs cannot be put back to factory your truck will require an aftermarket upper control arm with adjustable caster/camber.

    * NOTE: 2013-UP Tacoma TRD models require purchase of Sway Bar Relocation bracket. 

    Installation is simple and requires no strut preloading, cutting, or modification of factory installed parts. While other kits cost thousands to buy and hours to install, ReadyLIFT® can be installed one to two hours and costs less than the price of a single custom wheel.

    ReadyLIFT® Lifetime Warranty Included! All ReadyLIFT® products are backed by a lifetime warranty for as long as you own your vehicle and includes all necessary parts, hardware, detailed installation instructions, and two color decals.

    Note: It is ReadyLift’s position that our objective is to provide a product that levels the vehicle. Through on-going research we have discovered that Toyota trucks have a unique pattern of being manufactured and sold with varying degrees of rear to front rake. It appears that many Toyota trucks are not the same height or possess the same rake as the same stock truck sitting next to it. Our research has determined there can be as much as 1.0” difference in rake and ride height from truck to truck. TRD-equipped trucks often have only 1.0” of rake compared to a non-TRD truck. Measurements on some customer’s trucks have revealed as much as 1.0” difference in the factory front end height.

    If you measure the truck at stock height, then install a 3” strut extension and determine after installation and alignment that the truck sits nose high, you most likely are an owner of one of the trucks that has less rear to front rake. To compensate for the difference, ReadyLift suggests installing one of our 1.0” (66-5001) Rear Block Kits to achieve a slight rake to a level stance. 

    ReadyLIFT® Features

    • Keeps your factory ride - Guaranteed
    • Will never wear, break or fail - Guaranteed
    • Toughest finish – Guaranteed
    • Safest way to level lift - Guaranteed

      Smartest Strut Extensions Available

      ReadyLIFT® Top Mount Strut Extension
    • Safely installs without compressing struts
    • Fixed Lift
    • 10.9 rated mounting studs
    • Powder coated - Solid steel construction
    • Made from 7mm plate steel (over 1/4" thick)

      Notes:

      • 33" Tires will only work using an OEM wheel or OEM wheel-equivilant backspaced wheel. Some minor trimming may be required. 
      • Some applications may require 1" rear block kit Part# 66-5001
  • 33" Maximum tire diameter

    33x11.50 for no rub on a 9" wide wheel with +6 offset

    17" - 295/70R17

    18" - 295/65R18

    20" - 285/60R20

    22" - 285/50R22

  • One pair of fabricated steel upper strut extensions with differential drop spacers and skid plate spacers. 

  • Write Your Own Review
    You're reviewing:2'' Front Leveling Kit - Toyota Tacoma 6-Lug 1995.5-2004
    Your Rating
  • Do it yourself!

    Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.

    Download Pdf Instructions

    Have a certified mechanic do it for you!