2" Leveling Kit W/ Tubular Arms - Dodge Ram 1500 4WD 2006-2018
2006-2018 Dodge Ram 1500 4WD
2" Leveling Kit including new Tubular Upper Control Arm
Solves OEM control arm ball joint issues.
Max Tire: 35"
Not for use on truck with factory air suspension
Leveling a 2006-2018 Dodge Ram is an excellent way to achieve that "Ram Tough" look. ReadyLIFT leveling kits are the fastest, safest, least expensive way to bring the front of your vehicle level with the rear. Our innovative Smart Strut Technology mounts on top of the strut, unlike urethane spacer kits that compress the spring and deteriorate over time. In order to prevent premature CV joint wear or damage, ReadyLIFT designed the 66-1036 Dodge Ram 1500 leveling kit specifically to prevent any premature wear and tear on CV joints by developing a modest lift height that levels the truck without over-extending the suspension or drivetrain. And, 2.0" is the proper amount to LEVEL the 2009-2010 Dodge Ram. Any more of a lift than 2.0" on a '09-10 and the truck will sit nose high. 2006-2008 and 2011-2018 Ram 1500 4WD trucks will have approximately a 1/2" rake.
More for your money! This new kit features our renowned ReadyLIFT Tubular Upper Control Arms. The leveling kit with our Tubular Upper Control Arms resolves the common problem of the factory ball joint falling out of the stock control arm. This can occur when leveling a Ram 1500 4WD truck. This great leveling kit/UCA combination allows you to safely level your truck while ensuring you will never have a ball joint problem. If you haven't heard about this problem or haven't experienced it YET, just search online and you will find out the factory ball joints chronically separate from the stock control arm. If you want to safely level your Ram truck, this is the only kit you will want to install on your truck. The Dodge Ram 1500 kit features a pair of CNC-machined aircraft-grade 6061 T-6 billet Aluminum strut extensions designed specifically for the new Dodge Ram trucks. This lift also allows the 2006-2018 Dodge truck owner to install up to 35" tall off road tires without concern for clearance issues.
Max: 35" tire.
35x11.50 on a 9" wide wheel with +12 backspacing.
Kit contains two tubular control arms with corrected ball joint angles and new heavy duty ball joints.
Includes two CNC machined billet aluminum strut extensions and hardware.
Write Your Own Review
Do it yourself!
Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.Download Pdf InstructionsEstimated Installation Time: 4.3 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)
Have a certified mechanic do it for you!
California Residents: Prop 65 WARNING Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov