2013-UP Dodge Ram 3500 4WD SST Lift Kit - 3.0"F / 1.0"R
ReadyLIFT® Dodge Ram SST Lift Kits are the fastest, safest, least expensive way to lift your 2013-UP Dodge Ram 3500 4WD truck without compromising the factory ride or handling. Made with black e-coated steel, ReadyLIFT® 3.0" Lift coil spacers will not deteriorate or decrease ride height over time and allow you to retain the use of your factory front coil spring.
The NEW 69-1331 SST Lift Kit front coil spacer designed exclusively for the 2013-UP new style radius arm suspension trucks provides 3" of lift which gives clearance to add up to 35" wheels and tires to the 2013-UP Dodge Ram 3500 4wd.
NOTE: This kit will NOT fit 2012 and older model 3500 trucks with the older suspension design.
NOTE: Not Compatible with Power Wagon.
This kit consists of 3.0" lift thick steel front coil spring spacers and OEM style 1.0" rear lift blocks with new u-bolts and hardware. New generation polyurethane front bump stops retain your factory travel and new front shock extensions allow you to keep your new OEM shocks.
For information about tire and wheel sizes please visit the ReadyLift Tire Sizing and Calculator Page. ReadyLIFT® spacers are guaranteed to maintain a smooth ride without adding more pressure on the stock suspension components. Thanks to innovative engineering, ReadyLIFT® kits cost thousands less than a traditional lift kit and only take about 1-2 hours to install.
ReadyLIFT Lifetime Warranty Included! All ReadyLIFT® products are backed by a lifetime warranty for as long as you own your vehicle and includes all necessary parts, hardware, detailed installation instructions, and two color decals.
Fits New 2013-UP Ram 2500 4WD trucks.
- Keeps your factory ride - Guaranteed
- Will never wear, break or fail - Guaranteed
- Toughest finish – Guaranteed
- Safest way to level lift - Guaranteed
- Coil Spacer Made from 7mm plate steel (over 1/4" thick)
- Easy Install
- Includes OEM style 1.0" cast iron rear lift blocks and u-bolts
- Includes special polyurethane bump stops
- Shock extensions and hardware included
35" Maximum tire diameter
35x12.50 for no rub on a 9" wide wheel with 0 offset
18" - 315/70R18
20" - 295/65R20 / 325/60R20
22" - 35X12.5R22
Two front coil spring spacers.
Two rear 1. inch OEM style rear lift blocks..
Two front shock extensions.
Two extended front bump stops.
All necessary hardware and instructions.
Write Your Own Review
Do it yourself!
Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.Download Pdf Instructions
Have a certified mechanic do it for you!