3.5'' SST Lift Kit - Ford Super Duty F250/F350/F450 4WD (1-pc Drive Shaft Only) 2005-2007
Max Lift: 3.5"F/1.0"-3.0"R - Max Tire: 37". 3.5" Lift Kit
2005-2007 F-250/F-350 4WD.
For trucks with one-piece drive shafts.
ReadyLIFT Suspension has engineered a 3.5'' lift kit for the 2005-2007 Ford F250/F350 SuperDuty 4WD trucks that allows wheel and tire combinations up to 37'' while keeping the smooth OEM ride and drivability. This is a complete lift kit including 5'' OEM-equivalent rear blocks with integrated bump stop landings, 3.5'' coil spring extensions with sound isolators, an OEM-style panhard drop bracket, front bump stops, carrier bearing spacer, OEM shock extension brackets, a pair of radius arm drop brackets, and all needed hardware. When used with the maximum size tires, the F250 truck body is raised over 6''.
NOTE: The lift blocks in this kit are not designed to work with aftermarket or factory add-on air spring/load leveling kits that attach to the bump stop tangs. Use of this type of air bag system will void all block warranties and can cause failure of the block bump stop tang.
37" Maximum tire diameter
37x12.50 for no rub on a 9" wide wheel with 0 offset
18" - 37X12.5R18
20" - 37X12.5R20
22" - 325/60R22
Two coil spring spacers with poly sound isolators
Two front shock extensions.
Radius arm drop brackets.
Two front sway bar mount spacers.
One front track bar relocation bracket
Two OEM style cast rear lift blocks with longer u-bolts and hardware.
Two bump stop extensions.
Extended length front brake line brackets.
Write Your Own Review
Do it yourself!
Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.Download Pdf InstructionsEstimated Installation Time: 6 Hours +/- 1 hour (excluding alignment and wheel/tire assembly)
Have a certified mechanic do it for you!