Search by Vehicle

3" Rear Block Kit - GM Silverado & Sierra 1500 6-lug 1999-2018

$159.95
In stock
SKU
66-3003

Chevy/GMC 3 Inch OEM Style Rear Block Kit. 1999-2018 GM/CHEVY 1500 6 LUG 2WD/4WD 3.0in. TALL REAR BLOCK KIT OEM style cast iron rear lift blocks. Includes new U-bolts. Shock extensions may be needed depending on application.

Have a question? Please call 800-549-4620

TIRE/WHEEL SIZING GUIDE

California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov
Frequently Bought Together
Check items to add to the cart or
  • ReadyLIFT OEM-style rear block kits are available for model specific applications. These Rear Block Kits include two (2) 3" Rear Blocks, four (4) E-Coated U-Bolts, eight (8) Nuts and Washers and will safely lift the rear of your truck an additional 1" to 3" depending on the application. Based on OEM designs and never made out of light weight extrusions, our 3" GM Blocks are made from cast iron and have anti-rotation ears built-in. Fits 1999-2018 classic and current body style 6-lug model GM trucks. Models with 1.25" OEM blocks will want to take advantage of the additional 1.75" of lift for towing and hauling, particularly when using a front leveling kit. 1999-2006 4WD trucks will replace the factory 2" block for 1" of additional lift. This kit eliminates the dangers of having to stack blocks which may be illegal in some states. ReadyLIFT Block Kits will put a slight rake back in your truck for hauling or towing and are designed to work in concert with your ReadyLIFT Suspension Leveling Kit. Like all ReadyLIFT products, these block kits come with our Lifetime Warranty. Installation time is approximately 1.8 hours. Note: 2019-UP models may need to trim off excess bolt length after installation. NOTE: This GM 1500 kit is NOT COMPATIBLE with vehicles equipped with rear composite mono-leaf springs. The mono-leaf is easily identifiable ‚¬ the U-bolt is round/circular around the top of the leaf spring. This kit only works with vehicle equipped with traditional steel leaf springs, identified by ‚square‚ U-bolts.
  • SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

     

    INSTALLATION ALIGNMENT NOTE:  Your vehicle may require alignment after product installation.  You may incur additional costs to align the vehicle.

     

    INSTALLATION HEADLAMP AIM NOTE:  In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation.  You may incur additional costs to adjust the headlamp system.

     

    INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE:  If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle’s systems for proper aim and function after product installation.   In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS.  You may incur additional costs to adjust ADAS systems.


    DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation. Download Pdf Instructions
    Estimated Installation Time: 1.8 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)

    Have a certified mechanic do it for you!

  • California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov

Quick Overview
Chevy/GMC 3 Inch OEM Style Rear Block Kit. 1999-2018 GM/CHEVY 1500 6 LUG 2WD/4WD 3.0in. TALL REAR BLOCK KIT OEM style cast iron rear lift blocks. Includes new U-bolts. Shock extensions may be needed depending on application.
Details
ReadyLIFT OEM-style rear block kits are available for model specific applications. These Rear Block Kits include two (2) 3" Rear Blocks, four (4) E-Coated U-Bolts, eight (8) Nuts and Washers and will safely lift the rear of your truck an additional 1" to 3" depending on the application. Based on OEM designs and never made out of light weight extrusions, our 3" GM Blocks are made from cast iron and have anti-rotation ears built-in. Fits 1999-2018 classic and current body style 6-lug model GM trucks. Models with 1.25" OEM blocks will want to take advantage of the additional 1.75" of lift for towing and hauling, particularly when using a front leveling kit. 1999-2006 4WD trucks will replace the factory 2" block for 1" of additional lift. This kit eliminates the dangers of having to stack blocks which may be illegal in some states. ReadyLIFT Block Kits will put a slight rake back in your truck for hauling or towing and are designed to work in concert with your ReadyLIFT Suspension Leveling Kit. Like all ReadyLIFT products, these block kits come with our Lifetime Warranty. Installation time is approximately 1.8 hours. Note: 2019-UP models may need to trim off excess bolt length after installation. NOTE: This GM 1500 kit is NOT COMPATIBLE with vehicles equipped with rear composite mono-leaf springs. The mono-leaf is easily identifiable ‚¬ the U-bolt is round/circular around the top of the leaf spring. This kit only works with vehicle equipped with traditional steel leaf springs, identified by ‚square‚ U-bolts.
Installation

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

 

INSTALLATION ALIGNMENT NOTE:  Your vehicle may require alignment after product installation.  You may incur additional costs to align the vehicle.

 

INSTALLATION HEADLAMP AIM NOTE:  In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation.  You may incur additional costs to adjust the headlamp system.

 

INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE:  If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle’s systems for proper aim and function after product installation.   In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS.  You may incur additional costs to adjust ADAS systems.



DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation. Download Pdf Instructions
Estimated Installation Time: 1.8 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)

Have a certified mechanic do it for you!

Additional Information
California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov
Warning: This product can expose you to chemicals include [name of chemical], which [is/are] known to the State of California to case [cancer]/[birth defects or other reproductive harm]. For more information go to www.P65Warnings.ca.gov.