- \n
- High output 6.7L diesel with Aisin transmission – the transmission dipstick is on the left (driver) side of the truck. (PN 49-19620)<\/li>\n
- Standard 6.7L diesel with the 68RFE transmission – the transmission dipstick is on the right (passenger) side of the truck. (PN 49-19630)<\/li>\n<\/ul>\n
<\/p>\n
Why go to all that trouble to achieve 6\u201d of Ram 3500 lift?\u00a0 Six inches of lift provides plenty of clearance for an aggressive 37×13.5 tire and up to -18 offset wheel with no rubbing delivering a beefy, tough look.\u00a0 Some Ram HD trucks can experience a slight vibration after lifting due to driveline angle sensitivity. ReadyLIFT\u2019s 6\u201d lift kit with the Drive Line Indexing System (DIS) addresses this condition by re-clocking [indexing] the transfer case and providing a stout heavy-duty cross member that accommodates the new T-case position, all resulting in a smooth driving experience on or off-road.<\/p>\n
<\/p>\n
Both kits include the new indexing ring components, heavy-duty and great riding 6\u201d lift front springs, 5\u201d lift rear taper blocks, heavy-duty radius arm drop brackets, heavy-duty fabricated steel front, and rear track bar brackets, dropped cast iron pitman arm, front\/rear sway bar relocation brackets, and bump stop extensions preventing over-compression of the new Bilstein 5100 series front\/rear shocks.<\/p>\n
<\/p>\n
ReadyLIFT is also releasing two new stand-alone rear block Lift kits designed for the Ram 3500 HD. \u00a0These kits are fabricated from steel plate and each kit includes properly sized U-bolts and lock nuts for easy and secure installation.<\/p>\n
![\"ReadyLIFT](\"http:\/\/www.readylift.com\/blog\/content\/uploads\/2022\/06\/Ram-3500-6inch-kit.jpg\")
<\/p>\n<\/p>\n
<\/p>\n
Features and Benefits:<\/u><\/strong><\/p>\n
- \n
- 6\u201d front lift with a 5\u201d rear lift for the perfect lifted stance.<\/li>\n
- Includes all-new Driveline Indexing System with transfer case clocking ring and new heavy-duty transmission crossmember.<\/li>\n
- Maintains factory turning radius without rubbing when using the recommended wheel and tire size.<\/li>\n
- Maintains factory suspension geometry and articulation.<\/li>\n
- Includes 4 Bilstein 5100 series shocks tuned specifically for the Ram 3500 HD.<\/li>\n
- For use on the Ram 3500 4WD HD Diesel engine trucks only (excludes gasoline-engine applications).<\/li>\n
- Allows for up to 37×13.50 tires on 9″ wide wheels with -18 offset.<\/li>\n<\/ul>\n
<\/p>\n
*Kit will not fit any models with the HEMI Gasoline engine, dually models, Classic models, and any automatic-leveling rear air suspension models.<\/em><\/p>\n","protected":false},"excerpt":{"rendered":"