ReadyLIFT is excited to release new Auto-Leveling Headlight Brackets for the 2023-2024 Ford Super-Duty Trucks equipped with the onboard scale option. ReadyLIFT’s leveling and lift kits for the 2023+ Super-Duty trucks have been a huge success but trucks with the onboard scales need a solution to keep this function working properly without illuminating warning lights. These new brackets adjust the length and position of the front auto-leveling headlight sensor to the factory radius arms and a bypass bracket for ReadyLIFT’s Tubular Radius Arms. The new design moves the sensor towards the rear of the truck allowing for improved tire clearance along with adjusting the travel limits for proper function. Part number 67-23210 is designed to work with our leveling kits with a front lift up to 2.5,’’ the 67-23410 works on ReadyLIFT’s kits of 3.5” to 6” kits, and 67-23610 is our Bypass bracket for any lift height eliminating the bracket to the radius arms ideal for tubular radius arms.

FEATURES & BENEFITS:
• Fits 2023-UP Ford Super Duty Trucks equipped with onboard
scales.
• PN 67-23210 works with leveling kits up to a 2.5” front lift.
• PN 67-23410 works with ReadyLIFT kits of 3.5” lifts to 6” lifts.
• PN 67-23610 works with all ReadyLIFT lift kits but is designed
for tubular radius arms.
• Relocates auto-leveling headlight sensors for improved tire
clearance.

NOTE: Auto-Leveling Headlight brackets only work with Super Duty stock radius arms. The bypass bracket will work on all applications with or without stock radius arms. Read full instructions to set the headlight position before completing installation. Tremor 2.5” kits will need either 67-23410 or 67-23610 kits due to the lift being closer to 3.5″ over standard Super Duty trucks.