Translate
A smarter suspension refresh
Give Your 2011-2016 Ford Super Duty the Upgrade It Deserves
ReadyLIFT’s 2.5-inch Coil Spring Leveling Kit with Falcon 2.1 Monotube Shocks, Part 46-27291, gives owners of 2011-2016 Ford F-250 and F-350 diesel 4WD trucks a complete alternative to simply replacing aging factory shocks with more stock components.
Vehicle-tuned monotube damping delivers consistent ride control and stability at all four corners.
Engineered front coil springs create a stronger, more level stance without relying on a basic spacer.
Add tire clearance and a more capable look with the recommended wheel-and-tire setup.
Part number 46-27291
2.5-Inch Coil Spring Leveling Kit with Falcon 2.1 Shocks
Designed for trucks that still have years of work and adventure ahead, this integrated suspension package improves stance, ride control, and everyday drivability. Vehicle-specific coil springs, four Falcon shocks, and geometry-correcting components work together as a complete system.
- Fits 2011-2016 Ford F-250 and F-350 diesel 4WD trucks
- Falcon 2.1 Monotube shocks at all four corners
- Engineered front coil springs with up to 2.5 inches of lift
- Track bar relocation and support brackets
- Bolt-on suspension installation with no suspension cutting
Built for the miles ahead
More Than a Replacement Shock
As 2011-2016 Super Duty trucks age, worn factory shocks can affect control, stability, and driver confidence. The ReadyLIFT 46-27291 turns that maintenance moment into an opportunity to upgrade the entire suspension experience.
Falcon 2.1 Monotube shocks provide consistent damping for daily driving, jobsite use, and off-pavement travel. Paired with vehicle-specific front coil springs and geometry support, the result is a truck that looks more capable and feels more controlled.
Engineered as a complete system
The Components Needed for a Better Super Duty
Every part of the 46-27291 is designed to work together to improve stance and control while maintaining proper suspension geometry.
Vehicle-specific springs provide the front lift instead of relying on a basic spacer, helping create a level stance and additional tire clearance.
Four premium shocks deliver consistent damping, stability, and confident ride control in changing road and load conditions.
Purpose-built brackets help maintain axle position and support proper front suspension geometry at the increased ride height.
The suspension system installs without cutting suspension components, making it a practical upgrade for an older truck.
Tire fitment and application
Know Before You Build
The 46-27291 is designed specifically for 2011-2016 Ford F-250 and F-350 diesel 4WD trucks. Confirm the vehicle configuration and wheel-and-tire setup before installation.
35×12.50 tires on 9- or 10-inch-wide wheels with +25mm to 0mm offset.
37-inch tire note: Up to 37-inch tires may fit with trimming depending on wheel and tire selection. Always test fit before final installation.
Important Fitment Notes
- Diesel 4WD applications only
- Actual front lift is approximately 1.5 to 2.5 inches depending on the factory spring rate
- Some 2011-2016 F-250 applications may require a rear block kit for a level stance
- Wheel and tire dimensions can vary by manufacturer
No-cut clarification: “No cutting” applies to the suspension installation. Trimming may still be required for some wheel-and-tire combinations.
Refresh the ride. Upgrade the stance.
Keep Your Super Duty Ready for the Road Ahead
Upgrade your 2011-2016 Ford F-250 or F-350 diesel 4WD with engineered coil springs, four-corner Falcon 2.1 damping, and the components needed for a complete suspension refresh.