Translate
LOGIQ 2015+ Ford F-150 - Height Sensor Relocating Kit
This Height Sensor Relocation Kit is required for installation of the LOGIQ Air Spring Kit (PN: 88-21150) on F150s that are equipped with Continuously Controlled Damping (CCD).
This Height Sensor Relocation Kit is required for installation of the LOGIQ Air Spring Kit (PN: 88-21150) on F150s that are equipped with Continuously Controlled Damping (CCD).
This Height Sensor Relocation Kit is required for installation of the ReadyAIR Load Leveling System (PN: 88-21150) on F150s that are equipped with Continuously Controlled Damping (CCD). ReadyAIRs CCD Relocation brackets are constructed from high-strength laser-cut steel and feature a semi-gloss black powder coat for maximum protection from the elements. Application Notes: Does not fit trucks equipped with Powerboost hybrid engine ‚
This product may be covered by one or more trademarks, copyrights or patents. This information can be found at IP.WHEELPROS.COM‚
(1) Driver Side Upper Height Sensor Relocation Bracket
(1) Driver Side Lower Height Sensor Relocation Bracket
(1) Passenger Side Upper Height Sensor Relocation Bracket
(1) Passenger Side Lower Height Sensor Relocation Bracket
(1) Hardware Kit
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
INSTALLATION ALIGNMENT NOTE: Your vehicle may require alignment after product installation. You may incur additional costs to align the vehicle.
INSTALLATION HEADLAMP AIM NOTE: In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation. You may incur additional costs to adjust the headlamp system.
INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE: If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle’s systems for proper aim and function after product installation. In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS. You may incur additional costs to adjust ADAS systems.
TIRE/WHEEL SIZING GUIDE