Related Products
Check items to add to the cart or
Steering Box Stabilizer Bar - Dodge Ram 2500/3500 4WD 2003-2008 (part number 67-1090).
Fitment and Installation Notes
Steering Box Stabilizer Bar - Dodge Ram 2500/3500 4WD 2003-2008 (part number 67-1090).
Fitment and Installation Notes
Steering Box Stabilizer Bar - Dodge Ram 2500/3500 4WD 2003-2008 (part number 67-1090).
Many Ram 2003-2008 2500/3500 4WD owners may have discovered their truck has "steering wander" when driving. This is caused by a design issue with the truck itself. Often the factory-inherent problem is amplified when a lift or leveling kit is installed. Whether lifted or stock, your Dodge Ram 2500/3500 4WD will greatly benefit from our Steering Box Stabilizer Bar. This specially-designed bar bolts between the front frame rails and attaches to provide support to the steering box, which results in a much better driving truck.
The ReadyLIFT Steering Bar Stabilizer Bar will help eliminate the steering deficiencies in your truck by reinforcing the frame and steering box. Kit includes our super strong Steering Stabilizer Bar, greaseable bearing, hardware, and easy to read instructions. Dodge Ram 2500/3500 4WD Steering Box Stabilizer Bar Helps Remove Factory "Death Wobble"
Fitment and Installation Notes
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.