Search by Vehicle

1'' Rear Spacer Kit 2024-Up Toyota Tacoma

$179.95
In stock
SKU
26-54100

ReadyLIFT OEM-style rear spacer kit is now available for 2024 Toyota Tacoma applications. By popular request, we now offer the 1" tall rear coil spring spacer from our 2.5" SST lift kit separately. 26-54100 includes two rear coil spring spacers that are installed with no modifications and will help with providing extra rake and will safely lift the rear of your Tacoma an additional 1".


*Note:  Have not tested fitment on TRD Pro and Hybrid applications.


Have a question? Please call 800-549-4620

TIRE/WHEEL SIZING GUIDE

  • ReadyLIFT OEM-style rear spacer kit is now available for 2024 Toyota Tacoma applications. By popular request, we now offer the 1" tall rear coil spring spacer from our 2.5" SST lift kit separately. 26-54100 includes two rear coil spring spacers that are installed with no modifications and will help with providing extra rake and will safely lift the rear of your Tacoma an additional 1".


    *Note:  Have not tested fitment on TRD Pro and Hybrid applications.

  • Rear Spring Spacer
  • SAEJ2492 WARNING:Â By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

    Â

    INSTALLATION ALIGNMENT NOTE: Your vehicle may require alignment after product installation. You may incur additional costs to align the vehicle.

    Â

    INSTALLATION HEADLAMP AIM NOTE: In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation. You may incur additional costs to adjust the headlamp system.

    Â

    INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE: If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle’s systems for proper aim and function after product installation.  In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS. You may incur additional costs to adjust ADAS systems.


    DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation. Download Pdf Instructions
    Estimated Installation Time: 2 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)

    Have a certified mechanic do it for you!


Quick Overview

ReadyLIFT OEM-style rear spacer kit is now available for 2024 Toyota Tacoma applications. By popular request, we now offer the 1" tall rear coil spring spacer from our 2.5" SST lift kit separately. 26-54100 includes two rear coil spring spacers that are installed with no modifications and will help with providing extra rake and will safely lift the rear of your Tacoma an additional 1".


*Note:  Have not tested fitment on TRD Pro and Hybrid applications.


Details

ReadyLIFT OEM-style rear spacer kit is now available for 2024 Toyota Tacoma applications. By popular request, we now offer the 1" tall rear coil spring spacer from our 2.5" SST lift kit separately. 26-54100 includes two rear coil spring spacers that are installed with no modifications and will help with providing extra rake and will safely lift the rear of your Tacoma an additional 1".


*Note:  Have not tested fitment on TRD Pro and Hybrid applications.

Kit Components
Rear Spring Spacer
Installation

SAEJ2492 WARNING:Â By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

Â

INSTALLATION ALIGNMENT NOTE: Your vehicle may require alignment after product installation. You may incur additional costs to align the vehicle.

Â

INSTALLATION HEADLAMP AIM NOTE: In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation. You may incur additional costs to adjust the headlamp system.

Â

INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE: If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle’s systems for proper aim and function after product installation.  In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS. You may incur additional costs to adjust ADAS systems.



DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation. Download Pdf Instructions
Estimated Installation Time: 2 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)

Have a certified mechanic do it for you!