Related Products
Check items to add to the cart or
2.25" Leveling Kit - Ford F-150 2015-2020 (part number 66-2215).
Fitment and Installation Notes
2.25" Leveling Kit - Ford F-150 2015-2020 (part number 66-2215).
Fitment and Installation Notes
2.25" Leveling Kit - Ford F-150 2015-2020 (part number 66-2215).
This ReadyLIFT CNC-machined billet Aluminum Leveling Kit is designed specifically for the new 2015-2020 Ford F-150 trucks. The strut positioning is different on 2015-UP trucks requiring the development of a new front lift system to lift the front of this application. This Leveling Kit Front provides 2.25" of lift via strut extension Smart Suspension Technology For 2015-2020 Ford F-150 trucks.
To ensure proper leveling kit fitment, using a plumb bob line (for a clean vertical) to measure from the center of the wheel hub to the bottom edge of the fender at the 12 oclock position while the wheels are pointing straight forward. If this measurement is greater than 22" then the truck already has some factory front lift compared to a base truck. For distances measuring greater than 22" as described above, #66-2215 IS NOT the correct kit.
Use #66-2052 1.5 Leveling Kit to ensure proper front lift height and suspension geometry. Incorrectly using 66-2215 on a truck with 22" distance may result in UCA suspension component interference and/or excessive ball joint wear. 2015-20 FORD F-150 2WD/4WD Max Lift 2.25" - Maximum tire diameter: 35" Front Leveling Kit Crafted from CNC Machined billet aluminum Offset design engineered specifically for 2015-UP F-150 2WD/4WD Trucks
Fitment and Installation Notes
One pair of CNC machined billet aluminum offset leveling front spacers with hardware.
35" Maximum tire diameter (with trimming)
33x11.50 for no rub & no trimming on a 9" wide wheel with +25 offset
35x11.50 for no rub on a 9" wide wheel with +25 offset (will require minor trimming)
18" - 285/75R18
20" - 295/60R20
22" - 285/55R22
Tire Size Note: ReadyLIFT wheel and tire fitment recommendations are typically based on Wheel Pros wheels and Nitto tires. Due to product differences among tire manufacturers, tire specifications and dimensions including, but limited to, overall diameter, rolling diameter, tread width, aspect ratio, lug pattern, sidewall construction and inflation pressure, will vary meaningfully by tire and wheel manufacturer. Every tire and wheel combination should be test fit prior to installation. Consult your local installer to learn more about the right tire fitment for your application.
Ride Quality Note: When lifting a vehicle and installing aftermarket wheels and tires, a tire manufacturer's construction and material quality can alter vehicle ride quality. When increasing a vehicle wheel and tire size, most larger aftermarket truck and SUV tires are 10-ply (or more) E tires compared to typical OEM 6-ply C tires. This more rigid sidewall construction increases the perception of suspension stiffness often described as ride harshness. The ride, handling, traction, noise, fuel economy, and wear differences between All-Season, All-Terrain, Mud-Terrain, or Trail-Terrain type tires can be significant. Please take into account tire and wheel choice will generally have a meaningful impact on the ride & handling experience.
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.