Search by Vehicle

2007-2016 Chevrolet/GMC 1500 W/ Forged Steel OE UCA 4” SST UCA

$439.95
In stock
SKU
67-32850

-  Includes DOM tube steel upper control arms.

-  TCT - Terrain Control Technology maintenance-free pivot bushings.

-  Includes HD ball joint for better durability.

-  4” lifted trucks.


*Vehicles W/ Forged Steel OE UCA

Have a question? Please call 800-549-4620

TIRE/WHEEL SIZING GUIDE

  • One pair of heavy duty DOM tube steel control arms with corrected ball joint angles and heavy duty ball joints.

    Includes new ReadyLIFT TCT - Terrain Control Technology maintenance-free and self lubricating pivot bushings.

  • SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

     

    INSTALLATION ALIGNMENT NOTE:  Your vehicle may require alignment after product installation.  You may incur additional costs to align the vehicle.

     

    INSTALLATION HEADLAMP AIM NOTE:  In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation.  You may incur additional costs to adjust the headlamp system.

     

    INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE:  If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle’s systems for proper aim and function after product installation.   In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS.  You may incur additional costs to adjust ADAS systems.


    DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation. Download Pdf Instructions
    Estimated Installation Time: 3 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)

    Have a certified mechanic do it for you!

  • ReadyLIFT is excited to release SST Upper Control Arms(UCA), sold in pairs, as part of our ever-expanding suspension accessories. SST UCA’s are designed for and compatible with most lifted trucks. ReadyLIFT UCA kits are the same arms included in our full SST Lift Kits; however, they are now available standalone for customers seeking to upgrade their lifted truck with superior UCAs.

     

    Upper Control Arms are a great addition to lifted trucks. They provide improved suspension geometry for improved tire wear, increased stability, better handling, and exceptional road feel. Upper Control Arms are an integral part of independent front suspension (IFS) vehicles and generally connect the top of the knuckle to the frame. The UCA continually locates and guides the knuckle in a pre-determined path when the suspension cycles up and down during driving. Drivers can have confidence knowing the vehicle has superior stability and motion control over rough terrain - whether from rugged trails or ragged city streets. This improved stability on highways helps inspire confidence while navigating curves and turns without worry.

     

    ReadyLIFT SST UCA kits are constructed from Drawn Over Mandrel (DOM) round steel tubing. DOM tubing is produced for a more exact OD and ID tolerance and has the highest weld strength possible making ReadyLIFT UCAs some of the toughest tubular arms in the industry. On the knuckle end the DOM arms are then equipped with HD ball joints for superior strength and long life. Where the arms meet the frame, ReadyLIFT uses proprietary Terrain Control Technology bushings to ensure quiet, durable, and stable pivot performance. Finally, ReadyLIFT arms are powder-coated for an attractive yet durable finish.


Quick Overview

-  Includes DOM tube steel upper control arms.

-  TCT - Terrain Control Technology maintenance-free pivot bushings.

-  Includes HD ball joint for better durability.

-  4” lifted trucks.


*Vehicles W/ Forged Steel OE UCA

Kit Components

One pair of heavy duty DOM tube steel control arms with corrected ball joint angles and heavy duty ball joints.

Includes new ReadyLIFT TCT - Terrain Control Technology maintenance-free and self lubricating pivot bushings.

Installation

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

 

INSTALLATION ALIGNMENT NOTE:  Your vehicle may require alignment after product installation.  You may incur additional costs to align the vehicle.

 

INSTALLATION HEADLAMP AIM NOTE:  In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation.  You may incur additional costs to adjust the headlamp system.

 

INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE:  If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle’s systems for proper aim and function after product installation.   In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS.  You may incur additional costs to adjust ADAS systems.



DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation. Download Pdf Instructions
Estimated Installation Time: 3 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)

Have a certified mechanic do it for you!

Additional Information

ReadyLIFT is excited to release SST Upper Control Arms(UCA), sold in pairs, as part of our ever-expanding suspension accessories. SST UCA’s are designed for and compatible with most lifted trucks. ReadyLIFT UCA kits are the same arms included in our full SST Lift Kits; however, they are now available standalone for customers seeking to upgrade their lifted truck with superior UCAs.

 

Upper Control Arms are a great addition to lifted trucks. They provide improved suspension geometry for improved tire wear, increased stability, better handling, and exceptional road feel. Upper Control Arms are an integral part of independent front suspension (IFS) vehicles and generally connect the top of the knuckle to the frame. The UCA continually locates and guides the knuckle in a pre-determined path when the suspension cycles up and down during driving. Drivers can have confidence knowing the vehicle has superior stability and motion control over rough terrain - whether from rugged trails or ragged city streets. This improved stability on highways helps inspire confidence while navigating curves and turns without worry.

 

ReadyLIFT SST UCA kits are constructed from Drawn Over Mandrel (DOM) round steel tubing. DOM tubing is produced for a more exact OD and ID tolerance and has the highest weld strength possible making ReadyLIFT UCAs some of the toughest tubular arms in the industry. On the knuckle end the DOM arms are then equipped with HD ball joints for superior strength and long life. Where the arms meet the frame, ReadyLIFT uses proprietary Terrain Control Technology bushings to ensure quiet, durable, and stable pivot performance. Finally, ReadyLIFT arms are powder-coated for an attractive yet durable finish.