3'' Front Leveling Kit - Toyota Tundra / Sequoia 1999-2007
Tundra 1999-2006 2WD/4WD Sequoia 2000-2007 2WD/4WD
ReadyLIFT® leveling kits are the fastest, safest, least expensive way to bring the front of your vehicle level with the rear. Our innovative Smart Strut Technology mounts on top of the strut assembly, eliminating the hassle, time and danger of compressing springs. ReadyLift® steel strut extension will maintain a smooth OEM ride without adding pressure to stock suspension components, guaranteed!
The 66-5000 strut extension provides 3" of lift which gives clearance to add up to 33" wheels and tires to the 1999-2006 Toyota Tundra 2wd & 4wd. For information about tire and wheel sizes please visit the ReadyLIFTt Tire Sizing and Calculator Page.
Installation is simple and requires no strut preloading, cutting, or modification of factory installed parts. While other kits cost thousands to buy and hours to install, ReadyLIFT® can be installed in 2.5 hours and costs less than the price of a single custom wheel.
ReadyLIFT Lifetime Warranty Included! All ReadyLift® products are backed by a lifetime warranty for as long as you own your vehicle and includes all necessary parts, hardware, detailed installation instructions, and two color decals.
Note: It is ReadyLIFT's position that our objective is to provide a product that levels the vehicle. Through on-going research we have discovered that Toyota trucks have a unique pattern of being manufactured and sold with varying degrees of rear to front rake. It appears that many Toyota trucks are not the same height or possess the same rake as the same stock truck sitting next to it. Our research has determined there can be as much as 1.0" difference in rake and ride height from truck to truck. TRD-equipped trucks often have only 1.0" of rake compared to a non-TRD truck. Measurements on some customer's trucks have revealed as much as 1.0" difference in the factory front end height.
If you measure the truck at stock height, then install a 3" strut extension and determine after installation and alignment that the truck sits nose high, you most likely are an owner of one of the trucks that has less rear to front rake. To compensate for the difference, ReadyLift suggests installing one of our 1.0" (66-5001) Rear Block Kits to achieve a slight rake to a level stance.
ReadyLIFT® Top Mount Strut Extension
- Safely installs without compressing struts
- Fixed Lift
- 10.9 rated mounting studs
- Powder coated - Solid steel construction
- Made from 7mm plate steel (over 1/4" thick)
Smartest Strut Extensions Available
- Keeps your factory ride - Guaranteed
- Will never wear, break or fail - Guaranteed
- Toughest finish – Guaranteed
- Safest way to level lift - Guaranteed
- Some applications may require 1" rear block kit Part# 66-5001
- 33" tires will not fit with factory wheels. 17x8 with 4.5" of backspace recommended.
33" Maximum tire diameter
33x11.50 for no rub on a 9" wide wheel with +6 offset
17" - 295/70R17
18" - 295/65R18
20" - 285/60R20
22" - 285/50R22
One pair of fabricated steel top mount strut extensions with differential drop spacers and skid plate spacers.
Write Your Own Review
Do it yourself!
Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.Download Pdf InstructionsEstimated Installation Time: 2.5 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)
Have a certified mechanic do it for you!