3'' SST Lift Kit - Jeep JK Wrangler 4WD 2007-2018
Max Lift: 3.0"F / 2.0"R - Max Tire Size: 35"
2007-17 Jeep JK Wrangler 2DR/4DR
2012-UP vehicles may require driveshaft and exhaust modifications.
Jeep Wrangler JK owners, the lift kit system you been waiting for is here. The ReadyLIFT 69-6000 SST Lift Kit will raise the front of your 2007-2018 Jeep JK 3.0'' and 2.0'' in the rear. Rather than replace your reliable OEM springs or shocks, we incorporated our proven spring spacer technology into this comprehensive package which allows you to retain your OEM coil springs which translates into retaining the stock ride quality. You don't need to have to deal with a rough ride from other kits that replace your springs and shocks. This kit has it all and is done RIGHT! Tough powdercoated steel front and rear spring spacers provide the altitude adjustment while our panhard bar relocation bracket and shock extensions work together to keep that factory suspension and alignment geometry. That is very important if you want your Jeep JK to ride and handle properly. We even developed front and rear bump stop extension brackets and included them in the kit to help maintain the OEM compression travel.
This rugged new Jeep SST Lift Kit comes with all necessary hardware and instructions, as well as a Lifetime Limited Warranty on our products. Installation of the ReadyLIFT 69-6000 Jeep JK Wrangler SST Lift Kit System allows for use of up to 35'' tall tires. We rigorously tested this lift kit system using 35'' tires on 18'' wheels which proved to be a nice combination even when flexing the suspension during crawling trials.
NOTE: 2012-UP vehicles may require driveshaft and exhaust modifications.
NOTE: Some JK vehicles "may" require aftermarket longer front sway bar end links.
35" Maximum tire diameter
35x12.50 for no rub on a 9" wide wheel with 0 offset
17" - 35X12.5R17
18" - 315/70R18
20" - 295/65R20 / 325/60R20
22" - 35X12.5R22
Front/Rear steel coil spring spacers.
Rear track bar relocation bracket
Front/Rear shock extensions.
Caster cam bolts.
Bump stop extensions
All necessary hardware and instructions.
Write Your Own Review
Do it yourself!
Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.Download Pdf InstructionsEstimated Installation Time: 6 Hours +/- 1 hour (excluding alignment and wheel/tire assembly)
Have a certified mechanic do it for you!