3" SST2.1 Suspension System With Falcon 2.1 Struts/Shocks and Forged Aluminum Upper Control Arms - Toyota Tacoma 2024-2026 (part number 62-54341).

Give your 2024-2026 Toyota Tacoma a more aggressive stance with the comfort and control to back it up. The ReadyLIFT 62-54340 3" SST2.1 Suspension System pairs vehicle-specific Falcon 2.1 front struts and rear shocks with all-new Forged Aluminum Upper Control Arms for a premium upgrade on the street and trail.

Next-Generation Forged Strength

ReadyLIFT Forged Aluminum Upper Control Arms deliver enhanced strength and structural rigidity for confident performance on the road and off. Precision-engineered arm profiles optimize component clearance, while corrected geometry supports proper alignment in lifted applications.

The Pro Series Heavy-Duty High-Angle Ball Joint supports greater articulation and increased suspension travel while maintaining factory-like ride characteristics. Proprietary Terrain Control Technology (TCT) maintenance-free pivot bushings provide quiet, consistent suspension movement without routine lubrication.

A Type III hard-anodized finish provides durable surface protection. A billet aluminum O-ring dust cap and sealed ball joint assembly help keep corrosion, dirt, and debris out of critical components for dependable performance through daily driving and demanding terrain.

Falcon 2.1 Performance

Vehicle-specific Falcon 2.1 monotube dampers balance everyday comfort with controlled off-road performance. Improved dynamic roll control and low-speed damping help keep the truck composed through corners, washboard roads, and changing terrain. Rear adjustable 3-position Falcon 2.1 shocks tune for daily, sport, or work duties.

Falcon 2.1 dampers feature impact-resistant 6061-T6 aluminum alloy shock bodies, smooth-honed internal surfaces, and 3/4" induction-hardened, chrome-plated shafts. Hard-anodized billet pistons and one-piece Teflon bronze piston wear bands with O-rings support consistent damping and long-term performance.

System Highlights

• 3" front lift with rear coil springs for Tacoma models equipped with factory rear coil springs.
• Front skid plate and rear coil springs included.
• Up to 295/55R20 tires on an 8.5" wide wheel with +35 offset.

Fitment and Installation Notes

• Allows for 35x12.50 R17 with minor trimming.
• Kit does not fit Tacoma's equipped with rear leaf springs, TRD PRO, models equipped with Adaptive Variable Suspension (AVS), and Trail Hunter. ReadyLIFT has not tested or confirmed fitment on the optional sway bar disconnect.
• The maximum size for use with this kit (without trimming) is a 285/75R17 on an 8" wide and +35 offset wheel.
• Allows for 315/70R17 with minor trimming.
• Kit does not fit Tacoma's equipped with rear leaf springs. ReadyLIFT has not tested or confirmed fitment on the optional sway bar disconnect.

24 TACOMA RR SWAYBAR BRACKET

24+ TACOMA RR SPRG

24+ TACOMA SKD PLT

24 TACOMA DIFF REAR SPACER

24 TACOMA DIFF FRONT SPACER

24 TACOMA 3/8" LASER CUT WASHER

24 TACOMA REAR BRAKE LINE BRACKET

24 TACOMA DDC 1/8" LASER CUT WASHER

24 TACOMA FRT DIFF DROP, CTR SLEEVE

24 TACOMA FRT DIFF DROP, CTR BUSH

24 TACOMA FRT DIFF DROP, CENTER

0.87" OD X 0.56 ID X 2.65"L CRUSH SLEEVE

1.52" OD X 0.85"ID POLYURETHANE BUSHING

24 TACOMA FRT DIFF DROP, RH

24 TACOMA FRT DIFF DROP, LH

24 TACOMA RR BUMP STOP EXT, LH

24 TACOMA RR BUMP STOP EXT, RH

23 TACOMA FRT UCA ASSY, LH

24 TACOMA FRT UCA ASSY, RH

24+ TACOMA FRT CO, SRS 2 TYP 1

24+ TACOMA RR LT DMPER, SRS 3 TYP 2

24+ TACOMA RR RT DMPER, SRS 3 TYP 2

HARDENED STEEL WASHER

HARDWARE PACK

Wheel Tire Note

Stock (17x7 +60) 285/70R17 No Trim (Widest tire you can put on, Knuckle clearance)

17x8 +35 285/70R17 No Trim

17x8 +35 285/75R17 No Trim

17x8.5 +47 285/70R17 No Trim

17x8.5 +47 285/75R17 No Trim

17x8.5 +25 285/70R17 No Trim

17x9 +1 285/70R17 May require trimming. (4mm clearance)

Tire Size Comparison:

18x8 +35 285/65R18 No Trim

18x8 +35 285/70R18 No Trim

18x8.5 +47 285/65R18 No Trim

18x8.5 +47 285/70R18 No Trim

18x8.5 +25 285/65R18 No Trim

18x9 +1 285/65R18 May require trimming. (4mm clearance)

20x8.5 +35 295/55R20 No Trim

20x9 +18 295/55R20 No Trim

20x9 +1 295/55R20 May require trimming. (4mm clearance)

Tire Size Note: ReadyLIFT wheel and tire fitment recommendations are typically based on Wheel Pros wheels and Nitto tires. Due to product differences among tire manufacturers, tire specifications and dimensions including, but limited to, overall diameter, rolling diameter, tread width, aspect ratio, lug pattern, sidewall construction and inflation pressure, will vary meaningfully by tire and wheel manufacturer. Every tire and wheel combination should be test fit prior to installation. Consult your local installer to learn more about the right tire fitment for your application.

Ride Quality Note: When lifting a vehicle and installing aftermarket wheels and tires, a tire manufacturer's construction and material quality can alter vehicle ride quality. When increasing a vehicle wheel and tire size, most larger aftermarket truck and SUV tires are 10-ply (or more) E tires compared to typical OEM 6-ply C tires. This more rigid sidewall construction increases the perception of suspension stiffness often described as ride harshness. The ride, handling, traction, noise, fuel economy, and wear differences between All-Season, All-Terrain, Mud-Terrain, or Trail-Terrain type tires can be significant. Please take into account tire and wheel choice will generally have a meaningful impact on the ride & handling experience.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.