Cart
Toll Free Order Line 800.549.4620
Toll Free Order Line 800.549.4620
Clear
Cart
My Cart
Your Vehicle
Please make your selection below
Vehicle Make
    Model
      Year
        Drive
          Find my parts
          Clear
          Toll Free Order Line 800.549.4620
          Search by Vehicle
          main product photo

          Rear Heavy Duty Track Bar Bracket - Jeep JK Wrangler 4WD 2007-2018

          $129.95
          In stock
          SKU
          47-6438

          Includes Rear Heavy Duty Track Bar Bracket. Fits JK 2dr & 4dr - For use with 3.0" to 5.0" Lifts Mounts directly to rear axle housing to correct track bar angle and properly center rear axle.

          Have a question? Please call 800-549-4620

          TIRE/WHEEL SIZING GUIDE

           California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov
          • Jeep JK Wrangler Heavy Duty Rear Track Bar Bracket - USA Made! The 47-6438 Heavy-Duty Series REAR TRACK BAR BRACKET is an important component for lifted Jeeps. This kit includes one (1) bolt-on ReadyLIFT Heavy-Duty Series track bar bracket and hardware. This Rear Track Bar Bracket helps to correct important suspension geometry both on and off road. The bracket aids in keeping the rear track bar aligned properly with the axle housing while also providing a super strong axle mounting point for when severely articulating the Jeep suspension in an off road or rock crawling environment.

          • Includes Rear Plate Steel Heavy Duty Track Bar Bracket.
            Fits JK 2dr & 4dr - For use with 3.0" to 5.0" Lifts
            Mounts directly to rear axle housing to correct track bar angle and properly center rear axle.

          • SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

            Do it yourself!

            Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.

            Download Pdf Instructions
            Estimated Installation Time: 1.3 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)

            Have a certified mechanic do it for you!

          • California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov

          Quick Overview
          Includes Rear Heavy Duty Track Bar Bracket. Fits JK 2dr & 4dr - For use with 3.0" to 5.0" Lifts Mounts directly to rear axle housing to correct track bar angle and properly center rear axle.
          Details
          Jeep JK Wrangler Heavy Duty Rear Track Bar Bracket - USA Made! The 47-6438 Heavy-Duty Series REAR TRACK BAR BRACKET is an important component for lifted Jeeps. This kit includes one (1) bolt-on ReadyLIFT Heavy-Duty Series track bar bracket and hardware. This Rear Track Bar Bracket helps to correct important suspension geometry both on and off road. The bracket aids in keeping the rear track bar aligned properly with the axle housing while also providing a super strong axle mounting point for when severely articulating the Jeep suspension in an off road or rock crawling environment.
          Kit Components

          Includes Rear Plate Steel Heavy Duty Track Bar Bracket.
          Fits JK 2dr & 4dr - For use with 3.0" to 5.0" Lifts
          Mounts directly to rear axle housing to correct track bar angle and properly center rear axle.

          Installation
          SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.


          Do it yourself!

          Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.

          Download Pdf Instructions
          Estimated Installation Time: 1.3 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)

          Have a certified mechanic do it for you!

          Additional Information
          California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov
           TIRE/WHEEL SIZING GUIDE
          Warning: This product can expose you to chemicals include [name of chemical], which [is/are] known to the State of California to case [cancer]/[birth defects or other reproductive harm]. For more information go to www.P65Warnings.ca.gov.