Related Products
Check items to add to the cart or
SST3000 Rear Shocks For 2.5"-4.0" Rear Lift - Jeep JK Wrangler 4WD 2007-2018 (part number 93-6400R).
Fitment and Installation Notes
SST3000 Rear Shocks For 2.5"-4.0" Rear Lift - Jeep JK Wrangler 4WD 2007-2018 (part number 93-6400R).
Fitment and Installation Notes
SST3000 Rear Shocks For 2.5"-4.0" Rear Lift - Jeep JK Wrangler 4WD 2007-2018 (part number 93-6400R).
SOLD INDIVIDUALLY - 93-6400R SST3000 shocks made to fit the 2007-2018 Jeep JK Wrangler 2-door & 4-door. These SST3000 shocks are designed to be used on Jeep JKs with 2.5" or 3.0" of Rear Lift. Tested in MOAB, proven on the streets to be the best value Jeep shock you can buy for lifted Jeep JK Wrangler vehicles. Made in USA.
Fitment and Installation Notes
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.