Related Products
Check items to add to the cart or
Tie Rod Replacement Assemblies - GM 2500/3500 HD 2011-2024 (part number 67-3413).
Fitment and Installation Notes
Tie Rod Replacement Assemblies - GM 2500/3500 HD 2011-2024 (part number 67-3413).
Fitment and Installation Notes
Tie Rod Replacement Assemblies - GM 2500/3500 HD 2011-2024 (part number 67-3413).
ReadyLIFT 2011-2024 GM 2500/3500 HD 2WD/4WD heavy-duty tie rod steering assemblies are the ideal replacement for your bent or worn-out OEM tie rods. These heavy-duty steering assemblies are stronger than OEM tie rods and allow for greater articulation during droop or suspension compression. The kit includes a pair of complete steering assemblies - both inner and outer tie rods - and both ends feature exclusive grease joints to ensure proper lubrication. Ideal for replacing older worn out or bent OEM tie rods.
2011-UP Chevy Silverado & GMC Sierra Denali 2500/3500 HD Heavy Duty Replacement Tie Rod Assemblies Direct bolt on replacement. Features grease fittings both at the tie rod and at the inner joint. Stronger than OEM tie rods. Most popular tie replacement on the market.
Fitment and Installation Notes
One set of heavy duty replacement tie rod end assemblies.
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.