Related Products
Check items to add to the cart or
Tundra TRD Pro Skid Plate Spacer Kit (part number 67-5443).
Fitment and Installation Notes
Tundra TRD Pro Skid Plate Spacer Kit (part number 67-5443).
Fitment and Installation Notes
Tundra TRD Pro Skid Plate Spacer Kit (part number 67-5443).
ReadyLIFT now offers a quality CNC-machined billet Aluminum spacer kit designed to lower the TRD Pro Tundra skid plate when the differential is dropped/lowered in conjunction with a lift kit. Differential drop spacers and skid plate spacers are included in all ReadyLIFT Tundra SST and Complete lift kits.
If you have a Tundra (non TRD Pro) and have a TRD PRO skid plate, or want to install one on your lifted truck with a dropped differential, this is the kit you want to use to be able to run the skid plate. Some 2018 Tundra TRD trucks are coming with a TRD PRO skid plate. If you want to lift the truck with a ReadyLIFT lift kit, this is the supplemental skid plate spacer assembly you will need. Excludes cross member kits.
Fitment and Installation Notes
CNC machined billet aluminum skid plate spacer assembly kit with new longer hardware
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.