Search by Vehicle

2.0" AIR BAG SPACER

$99.95
In stock
SKU
66-1302

Designed to work with factory helper bags on 2017-2018 Ram 3500 trucks. Spaces assist bags up 2" to accommodate rear Suspension lift. Not for use on "factory air suspension".

Have a question? Please call 800-549-4620

TIRE/WHEEL SIZING GUIDE

California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov
  • The 66-1302 Ram 3500 air bag spacer kit is designed for the stock supplemental load capacity air bag set ups. These vehicle come with an auto ride height adjustment for the rear of the truck when pulling or hauling heavy loads. The spacers are designed to fit 1" to 2" rear additional lift heights, mainly for use with our 1-2" rear block kit or our 3/2 or 4.5/2 lift kits. It is made of 1/4" mild steel plate and 1/4" wall mild steel tubing in a 2" deck height. The system on the truck is untouched so that the auto level is not effected by the addition of the blocks and spacers. This allows the added lift heights and keeping the same load capacity of the stock unit. Note: Not for Factory Air Suspension. Factory Air Suspension equipped trucks do not have leaf springs or coil springs. The rear of the vehicle is suspended with airbags only.
  • SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

     

    INSTALLATION ALIGNMENT NOTE:  Your vehicle may require alignment after product installation.  You may incur additional costs to align the vehicle.

     

    INSTALLATION HEADLAMP AIM NOTE:  In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation.  You may incur additional costs to adjust the headlamp system.

     

    INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE:  If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle’s systems for proper aim and function after product installation.   In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS.  You may incur additional costs to adjust ADAS systems.


    DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation. Download Pdf Instructions

    Have a certified mechanic do it for you!

  • California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov

Quick Overview
Designed to work with factory helper bags on 2017-2018 Ram 3500 trucks. Spaces assist bags up 2" to accommodate rear Suspension lift. Not for use on "factory air suspension".
Details
The 66-1302 Ram 3500 air bag spacer kit is designed for the stock supplemental load capacity air bag set ups. These vehicle come with an auto ride height adjustment for the rear of the truck when pulling or hauling heavy loads. The spacers are designed to fit 1" to 2" rear additional lift heights, mainly for use with our 1-2" rear block kit or our 3/2 or 4.5/2 lift kits. It is made of 1/4" mild steel plate and 1/4" wall mild steel tubing in a 2" deck height. The system on the truck is untouched so that the auto level is not effected by the addition of the blocks and spacers. This allows the added lift heights and keeping the same load capacity of the stock unit. Note: Not for Factory Air Suspension. Factory Air Suspension equipped trucks do not have leaf springs or coil springs. The rear of the vehicle is suspended with airbags only.
Installation

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

 

INSTALLATION ALIGNMENT NOTE:  Your vehicle may require alignment after product installation.  You may incur additional costs to align the vehicle.

 

INSTALLATION HEADLAMP AIM NOTE:  In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation.  You may incur additional costs to adjust the headlamp system.

 

INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE:  If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle’s systems for proper aim and function after product installation.   In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS.  You may incur additional costs to adjust ADAS systems.



DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation. Download Pdf Instructions

Have a certified mechanic do it for you!

Additional Information
California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov
Warning: This product can expose you to chemicals include [name of chemical], which [is/are] known to the State of California to case [cancer]/[birth defects or other reproductive harm]. For more information go to www.P65Warnings.ca.gov.