2019-2024 Ram 3500 HD High Output Diesel 4WD 4.5" Coil Spring Lift Kit (part number 49-19430).

Give your Ram 3500 HD a taller stance and room for up to 37-inch tires with the ReadyLIFT 4.5-Inch Coil Spring Lift Kit. Designed for 2019-2024 Ram 3500 HD High Output Diesel 4WD trucks, kit 49-19430 pairs replacement front coil springs with four vehicle-tuned Falcon 1.1 Monotube shocks for a controlled, comfortable ride.

The system combines 4.5-inch front lift springs with 3-inch tapered rear lift blocks. Radius arm drop brackets, a front track bar bracket, a dropped pitman arm, and sway bar relocation brackets address suspension and steering geometry. Included bump stop components help prevent shock over-compression. ReadyLIFT's Driveline Indexing System uses a CNC-machined 6061-T6 billet aluminum clocking ring to reposition the transfer case and improve front driveline angles. A heavy-duty transmission crossmember and supporting installation components complete the system.

Designed for owners who want a substantial lift without stepping up to a 6-inch system, this kit brings together increased tire clearance, Falcon shock control, and the components needed for the suspension upgrade. 4.5-inch coil spring lift kit for 2019-2024 Ram 3500 HD High Output Diesel 4WD trucks. 4.5-inch front lift springs and 3-inch rear lift blocks. Four vehicle-tuned Falcon 1.1 Monotube shocks. Accommodates tires up to 37 inches.* Includes transfer case indexing components and a heavy-duty transmission crossmember.

Includes brackets and steering components to correct suspension geometry. Service Note

Fitment and Installation Notes

• Fits High Output diesel models only.
• Does not fit standard-output diesel, HEMI gasoline, dually, or Classic models.
• Not compatible with factory air suspension or automatic rear leveling systems, including factory helper air bags.
• Single Cab fitment and drivability have not been validated by ReadyLIFT.
• Tire clearance depends on wheel specifications and vehicle configuration. Confirm the recommended tire and wheel combination before purchasing.
• Review RAM TSB 03-003-23 for information about clicking or ratcheting noises when turning in 4WD. Download TSB information.
• For High Output diesel 4WD models only. Not compatible with standard-output diesel, HEMI gasoline, dually, Classic, or factory air/automatic-leveling suspension models. Single Cab fitment and drivability have not been validated. Review tire, wheel, and drivetrain requirements before ordering.

Additional Product Details

Falcon Shocks " The Ultimate Blend of Performance, Quality, and Bang for the Buck

· Falcon 1.1 Monotube Shocks deliver increased stability improved ride quality and comfort for a daily-driven vehicle in an economical, compact performance package.

· Falcon 1.1 Monotube Shocks have been optimized for on-road driving with increased stability over stock for driven vehicles on and off road. High- Value Performance is the driving force behind these vehicle-specific dampers for trucks and SUVs.

· Falcon 1.1 Monotube Shocks are ideal for daily driven trucks and SUVs as well as the enthusiast wanting a consistent controlled feel through all driving conditions

· Falcon 1.1 Monotube shocks include race-inspired performance, handling, and stability for off-road rigs. Falcon Jeep shock absorbers will significantly increase the chassis performance of any lifted truck or SUV.

· Falcon 1.1 Monotube Shock Specifications

o 2-1/8" shock body for high-value performance

o 6061-T6 aluminum alloy billet piston

o 1/2" induction hardened chrome plated shaft resists rock damage corrosion and shaft buckling

o Microcellular Foam" Progressive Bump Stops (Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders.)

Maximum fitment: 37x12.50 tire

20'' x 9" wide wheel -18 offset

Tire Size Note: ReadyLIFT wheel and tire fitment recommendations are typically based on Wheel Pros wheels and Nitto tires. Due to product differences among tire manufacturers, tire specifications and dimensions including, but limited to, overall diameter, rolling diameter, tread width, aspect ratio, lug pattern, sidewall construction and inflation pressure, will vary meaningfully by tire and wheel manufacturer. Every tire and wheel combination should be test fit prior to installation. Consult your local installer to learn more about the right tire fitment for your application.

Ride Quality Note: When lifting a vehicle and installing aftermarket wheels and tires, a tire manufacturer's construction and material quality can alter vehicle ride quality. When increasing a vehicle wheel and tire size, most larger aftermarket truck and SUV tires are 10-ply (or more) E tires compared to typical OEM 6-ply C tires. This more rigid sidewall construction increases the perception of suspension stiffness often described as ride harshness. The ride, handling, traction, noise, fuel economy, and wear differences between All-Season, All-Terrain, Mud-Terrain, or Trail-Terrain type tires can be significant. Please take into account tire and wheel choice will generally have a meaningful impact on the ride & handling experience.

4.5" Front Lift Spring

3-Inch Fabricated Block

19-21 Ram 3500 U-Bolt for 4.5-Inch Kit

Falcon Shock, Front

Falcon Shock, Rear

Radius Arm Drop, Driver

Radius Arm Drop, Passenger

Front Track Bar Bracket

Driver, Sway Bar Drop Bracket

Passenger, Sway Bar Drop Bracket

Replacement Front Bump Stop

Rear Bump Stop Extension

Pitman Arm, Drop, Replacement

Transmission Connector Bracket

Transmission Crossmember

Transmission Harness Bracket

Transmission Mounting Plate

Transmission Mount Spacer

8 Bolt Clocking Ring

Front Brakeline Bracket

Rear Brakeline Bracket

E-Brake Extension

Pinch Clamp

Transfer Case Spacer

Auto Trans Extension Housing Seal (MOPAR)

Hardware Pack