8.5" Lift Kit W/ Falcon Shocks - Ford Super Duty Diesel F250/F350 4WD 2017-2022
ReadyLIFT, a leader in the lifted suspension market, is proud to announce the release of our 8.5" Coil Spring Lift Kit for 2017-2022 4WD Ford Super Duty F250/F350 trucks equipped with a 6.7L Power Stroke® diesel engine. This lift kit is designed to provide a heightened experience for drivers who are looking to take their vehicles to the next level.
- 2020-2022 gives 8.5" Coil Spring Lift Kit With (4) Falcon 1.1 Monotube Shocks
- 2017-2019 gives 8" Coil Spring Lift Kit With (4) Falcon 1.1 Monotube Shocks
NOTE: Tremor versions will not gain the full 7" over stock ride height and will need longer U-bolts, see note above. Not recommended for 2WD or gas trucks. 2017-2019 ride height may be slightly lower and Single rear wheels only. Single Cab configuration has not been validated for fitment & drivability by ReadyLIFT.
ReadyLIFT, a leader in the lifted suspension market, is proud to announce the release of our 8.5" Coil Spring Lift Kit for 2017-2022 4WD Ford Super Duty F250/F350 trucks equipped with a 6.7L Power Stroke® diesel engine. This lift kit is designed to provide a heightened experience for drivers who are looking to take their vehicles to the next level.
- 2020-2022 gives 8.5" Coil Spring Lift Kit With (4) Falcon 1.1 Monotube Shocks
- 2017-2019 gives 8" Coil Spring Lift Kit With (4) Falcon 1.1 Monotube Shocks
NOTE: Tremor versions will not gain the full 7" over stock ride height and will need longer U-bolts, see note above. Not recommended for 2WD or gas trucks. 2017-2019 ride height may be slightly lower and Single rear wheels only. Single Cab configuration has not been validated for fitment & drivability by ReadyLIFT.
ReadyLIFT, a leader in the lifted suspension market, is proud to announce the release of our 8.5" Coil Spring Lift Kit for 2017-2022 WD Ford Super Duty F250/F350 trucks equipped with a 6.7L Power Stroke® diesel engine. This lift kit is designed to provide a heightened experience for drivers who are looking to take their vehicles to the next level.
The ReadyLIFT 8.5” Coil Spring Lift Kit offers a new smoother ride quality, improved clearance for off-road adventure, and an impressive stance that will draw envious looks wherever you go. This distinct lift kit includes all necessary components including heavy-duty coil springs, brake lines relocations brackets, extended sway bar links, bump stop extensions, and more! The all-new big lift kit includes four Falcon 1.1 Monotube shocks designed and tuned specifically for this application. Whether you're looking for improved ride quality or just want to customize your truck's appearance, the ReadyLIFT 8.5" Coil Spring Lift Kit is the perfect solution. It stands apart from other lifts due to its ability to deliver performance, comfort, and style in one package!
Features and Benefits:
- 2017-2022 Ford Super Duty F-250 / F-350 Power Stroke® diesel 4WD
- 2020-2022 gives 8.5" Coil Spring Lift Kit With (4) Falcon 1.1 Monotube Shocks
- 2017-2019 gives 8" Coil Spring Lift Kit With (4) Falcon 1.1 Monotube Shocks
- All-new and improved Driveline Indexing System preserves driveline angles
- Max Tire 38x13.50 on 10" wide wheel with +12 offset
Note: Diesel trucks only. Single rear wheels only, Not compatible with gas engine trucks.
38" Maximum tire diameter
37x12.50 for no rub on a 9" wide wheel with 0 offset
38x13.50 on 10" wide wheel with +12 offset
18" - 37X12.5R18
20" - 37X12.5R20
22" - 325/60R22
Tire Size Note: ReadyLIFT wheel and tire fitment recommendations are typically based on Wheel Pros wheels and Nitto tires. Due to product differences among tire manufacturers, tire specifications and dimensions including, but limited to, overall diameter, rolling diameter, tread width, aspect ratio, lug pattern, sidewall construction and inflation pressure, will vary meaningfully by tire and wheel manufacturer. Every tire and wheel combination should be test fit prior to installation. Consult your local installer to learn more about the right tire fitment for your application.
Ride Quality Note: When lifting a vehicle and installing aftermarket wheels and tires, a tire manufacturer's construction and material quality can alter vehicle ride quality. When increasing a vehicle wheel and tire size, most larger aftermarket truck and SUV tires are 10-ply (or more) E tires compared to typical OEM 6-ply C tires. This more rigid sidewall construction increases the perception of suspension stiffness often described as ride harshness. The ride, handling, traction, noise, fuel economy, and wear differences between All-Season, All-Terrain, Mud-Terrain, or Trail-Terrain type tires can be significant. Please take into account tire and wheel choice will generally have a meaningful impact on the ride & handling experience.
LIFT SPRING
DROP PITMAN ARM
TRACK BAR BRACKET
TRACK BAR BRACKET WASHER
FRONT BUMP STOP EXTENSION
FRONT SWAY BAR BRACKET, DRIVER
FRONT SWAY BAR BRACKET, PASSENGER
RADIUS ARM DROP, DRIVER
RADIUS ARM DROP, PASSENGER
RADIUS ARM CRUSH SLEEVE
BRAKE LINE BRACKET DRIVER
BRAKE LINE BRACKET PASSENGER
STEERING STABILIZER BRACKET FRAME
STEERING STABILIZER BRACKET TIE ROD
STEERING STABILIZER CONE WASHER
REAR SWAY BAR BRACKET
REAR BLOCK DRIVER
REAR BLOCK PASSENGER
U-BOLT
U-BOLT HARDWARE PACK
FRONT SHOCK
REAR SHOCK
STEERING STABILIZER
TRANSFER CASE CLOCKING RING
TRANSMISSION CROSS MEMBER
CARRIER BEARING SPACER
ADD-A-LEAF PACK
HARDWARE PACK
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
INSTALLATION ALIGNMENT NOTE: Your vehicle may require alignment after product installation. You may incur additional costs to align the vehicle.
INSTALLATION HEADLAMP AIM NOTE: In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation. You may incur additional costs to adjust the headlamp system.
INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE: If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle’s systems for proper aim and function after product installation. In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS. You may incur additional costs to adjust ADAS systems.
Have a certified mechanic do it for you!
Falcon Shocks‚ The Ultimate Blend of Performance, Quality, and Bang for the Buck
- Falcon 1.1 Monotube Shocks deliver increased stability improved ride quality and comfort for a daily-driven vehicle in an economical, compact performance package.
- Falcon 1.1 Monotube Shocks have been optimized for on-road driving with increased stability over stock for driven vehicles on and off road. High-Value Performance is the driving force behind these vehicle-specific dampers for trucks and SUVs.‚
- Falcon 1.1 Monotube Shocks are ideal for daily driven trucks and SUVs as well as the enthusiast wanting a consistent controlled feel through all driving conditions
- Falcon 1.1 Monotube shocks include race-inspired performance, handling, and stability for off-road rigs. Falcon Jeep shock absorbers will significantly increase the chassis performance of any lifted truck or SUV.
- Falcon 1.1 Monotube Shock Specifications
o 2-1/8" shock body for high-value performance
o 6061-T6 aluminum alloy billet piston
o 1/2" induction hardened chrome plated shaft resists rock damage corrosion and shaft buckling
o Microcellular Foam Progressive Bump Stops (Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders.)