LOGIQ AirIQ 2-Channel Remote Control
LOGIQ AirIQ 2-Channel Remote Control (part number 50-21200).
Fitment and Installation Notes
Description
LOGIQ AirIQ 2-Channel Remote Control (part number 50-21200).
Fitment and Installation Notes
LOGIQ AirIQ 2-Channel Remote Control (part number 50-21200).
The LOGIQ AirIQ Bluetooth Remote Control allows real-time pressure adjustment and preset selection of any AirIQ SD1/SD2/HD2 from up to 200 ft away. The full color LCD display offers crystal-clear daytime and nighttime operation while 3 AAA batteries ensure extended use. The included magnetic visor dock secures the remote for easy access. Learn more about LOGIQ and Air Solutions!
Fitment and Installation Notes
(1) 2-Channel Remote Control
(3) AAA Batteries (non-rechargeable)
(1) Magnetic Visor Dock
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
ADDITIONAL SERVICES & COSTS MAY BE REQUIRED
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.
Have a certified mechanic do it for you!
TIRE/WHEEL SIZING GUIDE