ReadyLift offers model specific wheel spacers for 07-UP Chevy Silverado and GMC Sierra 1500 6-lug trucks. Precision CNC-machined from 6061-T6 billet aluminum for maximum strength and longevity, the ReadyLift 10-3485 wheel spacers are 7/8" thick and include pressed in 14mm factory style studs. These new wheel spacers are designed for use with the ReadyLift 69-3485, 69-3285, 69-3295 and 69-3495 4" SST Lift Kit when running the factory wheels. Wheel spacers are required when using the factory GM wheels and the 4" kit to properly space the factory wheel away from the suspension.

Will only work with factory GM wheels which have the "pockets" in the back side of the wheel next to the lug holes. Will NOT work with factory steel wheels.

Caution- make sure the factory lugs fit into the wheel pockets without making contact with the wheel " the adapter must fit flush with the wheel.

Each wheel spacer is both hub centric and wheel centric to insure the absolute perfect fit with your hub and wheel. You will not find a stronger wheel spacer in this size anywhere on the market. When installed the 10-3485 wheel spacer will place the outer wheel lip in line with the fender. The wheels WILL NOT stick out using this spacer.

Can be used on '99-07 GM 1500 trucks if required for the individual application and if the factory wheels or the aftermarket wheels being used on the 99-07 Classic body style truck have the factory pockets cast into the back side of the wheel next to the lug holes.

Sold as Pairs. (two wheel spacers)
Quantity 1 = one pair.
For use with GM factory wheels that have the "pockets" next to the lug holes.

2 Billet Aluminum Spacers

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.